Omron SYSMAC CS1W-SCB41-V1 Operation Manual page 706

Visual Inspection System Protocol
Measurement Execution (F300) (Sequence No. 460 (Hex 01CC))
This sequence carries out one measurement and stores measurement results in the specified words.
Send Data Word Allocation (3rd Operand of PMCR(260))
None.
Receive Data Word Allocation (4th Operand of PMCR(260))
Receive data
storage words
Note 1. Exponential expressions are used for numbers larger than 9999999.999 and smaller than –999999.9.
2. The number of measurement items is up to 5, but only one window number can be read.
3. The ranges of measurement values are as follows:
For calibration OFF setting: –2147483.648 to 2147483.648
For calibration ON setting: –9999999.999 to 9999999.999
+0 Number of receive data words
+1 (Undefined)
(Undefined)
+2
+3
Integer portion
+4
+5 Sign 0
+6
+7 Integer portion
+8
Sign 0
+9
Integer portion
+10
Sign 0
+11
+12
+13 Integer portion
Sign 0
+14
+15
+16 Integer portion
Sign 0
+17
Offset Content (data format)
+0 Number of receive data words
(4 digits Hex)
+1 Window number (2 digits BCD)
+2 Evaluation result (1 digit BCD)
+3 to +5 Measurement value (decimal portion)
(3 digits BCD)
Measurement value (integer portion)
(7 digits BCD)
Measurement value (sign)
(1 digit)
+6 to +8 Same as +3 to +5.
+9 to Same as +3 to +5.
+11
+12 to Same as +3 to +5.
+14
+15 to Same as +3 to +5.
+17
Window No.
Evaluation
result
Decimal portion
Decimal portion
Decimal portion
Decimal portion
Decimal portion
0006:
0009:
000C:
000F:
0012:
00 to 07
0: OK
1: NG
Example
–123.456
+3
+4
+5
F is stored for negative values.
Same as +3 to +5.
Same as +3 to +5.
Same as +3 to +5.
Same as +3 to +5.
Appendix O
Data 1
Data 2
Data 3
Data 4
Data 5
Data
1 measurement item
2 measurement items
3 measurement items
4 measurement items
5 measurement items
Example
+123.456
3456 +3 3456
0012 0012
+4
F000 0000
+5
677