Omron SYSMAC CS1W-SCB41-V1 Operation Manual page 404

CompoWay/F Master Protocol
Receive Data Word Allocation (4th Operand of PMCR(260))
Broadcast with No Conversion and No Response
(Sequence No. 603 (Hex 025B))
This sequence broadcasts the specified data beginning with the command code No responses are received
and no conversions are performed on the send data.
Send Data Word Allocation (3rd Operand of PMCR(260))
Offset Contents (data format)
+0 Number of send data words
(4 digits Hex)
+1 (Undefined)
+2 MRC
(2 digits Hex)
+3 Number of send bytes (4 digits Hex)
+4 Send data
on
+0
+2
+4
+6 etc.
Receive data Number of receive data words
+0
storage words
+1
+2
Offset Contents (data format)
+0 Number of receive data words
(4 digits Hex)
+1 Response code (4 digits Hex)
+2 Receive data (Hex)
on
+0
+2
+4
+6 etc.
First word of +0 Number of send data words
send data
+1
+2
MRC
+3
+4
Offset Contents (data format)
+0 Number of send data words
(4 digits Hex)
+1 (Undefined)
+2 MRC
(2 digits Hex)
+3 Number of send bytes (4 digits Hex)
0005 to 00FA Hex (5 to 250 decimal)
Node No. (2 digits 00 to 99
BCD)
SRC Set the command code for the required ser-
(2 digits Hex) vice
Number of data bytes from the next byte
after the command code until the byte just
before the ETX.
0000 to 01EC Hex (0 to 492 decimal)
The data specified in hexadecimal here is
not converted and the number of bytes
+1
specified in S+3 is sent.
+3
+5
Response code
Receive data
0003 to 00FA Hex (3 to 250 decimal)
The response code will be stored in hexa-
decimal form.
The data from just after the response code
until just before the ETX is stored here with-
+1
out conversion.
+3
+5
(Undefined)
SRC
Number of send bytes
Send data
0005 to 00FA Hex (5 to 250 decimal)
---
SRC Set the command code for the required ser-
(2 digits Hex) vice
Number of data bytes from the next byte
after the command code until the byte just
before the ETX.
0000 to 01EC Hex (0 to 492 decimal)
Appendix B
Data
Data
Data
375