Omron SYSMAC CS1W-SCB41-V1 Operation Manual page 217

Simple Backup Function (Backup of Protocol Macro Data)
Precautions for Using the
Simple Backup Function
Applications
Operation
188
CPU Unit
CS1-H CPU Unit
CS1 CPU Unit
CPU Unit
CJ1-H CPU Unit
CJ1 CPU Unit
CJ1M CPU Unit
When using the Simple Backup Function in CS1H/G-CPU@@
Lot No. 011101 or earlier* combined with the Serial Communications Board
(CS1W-SCB@@
-V1), proper backup will not be possible if the backup file
(BACKUPE1.PRM) remains in the Memory Card.
*Reading lot numbers
CS1H/G-CPU @@H Lot No. 01 11 01
In order to use the Simple Backup Function in this combination, delete the
backup file (BACKUPE1.PRM) inside the Memory Card, then execute the backup.
If backup is executed without deleting this backup file, the RDY LED and the
CPU Unit's ERR/ARM LED will both flash, and t
A42409) will turn ON with the restore operation. The
will also automatically delete the
Use the Simple Backup Function when replacing all Units or creating backup
files of all of the PLC's data, including the data in the CPU Unit and Serial
Communications Boards or Units.
Use the following procedures to create a Protocol Data File on the Memory
Card, restore the Protocol Data File, and compare the protocol data with the
Memory Card's Protocol Data File.
■ Backing Up the Protocol Data to the Memory Card
Follow these steps to back up the Serial Communications Board/Unit's proto-
col data to the Memory Card:
1. Make the following settings to pins 7 and 8 in the DIP Switch on the front
of the CPU Unit.
Pin
7
8
2. Press and hold the Memory Card power supply switch for 3 seconds.
Serial Communications Board/Unit
CS1W-SCB21-V1,
CS1W-SCB41-V1,
CS1W-SCU21-V1, or
CS1W-SCU31-V1
Supported
Not supported
Serial Communications Board/Unit
CJ1W-SCU21(-V1)/31-V1/41(-V1)
Supported
Not supported
Supported
...Produced November 1, 2001
Production day (in this example: 1)
Production month (in this example: 11)
Production year (in this example: 2001)
backup file (BACKUPE1.PRM).
Setting
ON
OFF
Section 5-5
CS1W-SCB21,
CS1W-SCB41, or
CS1W-SCU21
Not supported
Not supported
products of
H
he Protocol Data Error Flag (bit
Serial Communications Board