Copy Current-Software - Centrecom FS980M/9 Command Reference Manual

F C M
ILE AND ONFIGURATION ANAGEMENT
-
COPY CURRENT SOFTWARE

copy current-software

Overview This command copies the AlliedWare Plus™ OS software that the device has
booted from, to a destination file. Specify whether the destination is Flash or USB
when saving the software to the local filesystem.
copy current-software <destination-name>
Syntax
Mode Privileged Exec
Example To copy the current software as installed in the working directory with the file
name my-release.rel, use the command:
awplus#
Related boot system backup
Commands
show boot
613-50137-01 Rev A
C
OMMANDS
Parameter
<destination-name>
copy current-software my-release.rel
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Description
The filename and path where you would like the current
running-release saved. This command creates a file if no file
exists with the specified filename. If a file already exists,
then the CLI prompts you before overwriting the file. See
Introduction on page 70 for valid syntax.
84