Id Sensor, Pick-Off Pawls, Pick-Off Pawl Solenoid - Ricoh B286 Service Manual

3.5.3 ID SENSOR, PICK-OFF PAWLS, PICK-OFF PAWL
SOLENOID
1. Drum (See section 3.5.1 "Drum Unit.")
2. Cleaning blade (See section 3.5.2 "Cleaning Blade")
ID sensor [A] (& x 3, # x 1, " x 1)
3.
4. Pick-off pawls (x2) [B] (pressure release).
Pick-off pawl solenoid [C] (# x 2, " x 1)
5.
Reinstallation
! After replacing or cleaning the ID sensor, do SP3001-2 to initialize the new ID sensor.
! If the ID sensor is damaged and cannot be replaced immediately, set SP2208-3 (Toner
Supply Setting – Toner Supply Mode) to "1." Then the customer can continue to use
the machine until a new ID sensor is available. After you install a new ID sensor, reset
this SP to 0.
SM 3-31
Drum
B286/B289