Cleaning; Pick-Off Pawl Replacement - Ricoh FT5580 Service Manual

12 June 1987

CLEANING

1. Pick-off Pawl Replacement

1. Remove the pick-off guide plates [A] (1 screw each).
2. Remove the pawl shaft pin [B] from the pawl shaft [C].
3. Push the pawI shaft to the rear and slide the cam holder [D] off the
front side plate.
4. Remove the complete pawl shaft assembly.
5. Slide off the cam holder and cam rider [E].
6. Slide off the front pick-off pawI [F] (1 screw).
7. Slide off the rear pick-off pawl [G] (1 positioning pin [H]).
8. Place the new pick-off pawls on the shaft and position them with the
positioning pins and pawl springs.
3-18