Cassette Modification - Ricoh FT4480 Field Service Manual

9. CASSETTE MODIFICATION

1. Remove the cassette cover [A].
2. Remove the side fences [B] (1 screw each) and the bottom plate [C].
Reposition the rear fence [D] in the desired paper size position (1
3.
screw).
NOTE: Paper size positions are shown on the inside of the cassette.
Reinstall the bottom plate.
4.
5. Reinstall the side fences in the desired paper size position.
6. Attach the proper paper size decals [E] on the cassette at the
positions shown.
7. Insert the actuator plate [F] in the slot on the front of the cassette
as shown.
NOTE: The actuator plates are enclosed in the cassettes.
Save the other actuator plates for future use.
1-17
15 MARCH 1987