Display Bgp Multicast Network - HP 3600 v2 Series Command Reference Manual

Field
Threshold
Configured hold timer value
Keepalive timer value
Minimum time between advertisement runs
Peer Preferred Value
No routing policy is configured
Members
Peer
AS
MsgRcvd
MsgSent
OutQ
PrefRcv
Up/Down
State

display bgp multicast network

Syntax
display bgp multicast network [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
2: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp multicast network to display IPv4 MBGP routing information advertised with the
network command.
Description
Percentage of received prefixes from the peer group to
maximum prefixes allowed to receive from the peer group;
If the percentage is reached, the system generates alarm
messages.
Holdtime interval.
Keepalive interval.
Minimum interval for route advertisement.
Preferred value specified for the routes from the peer.
No routing policy is configured.
Detailed information of the members in the peer group.
IPv4 address of the peer.
AS number of the peer.
Number of messages received.
Number of messages sent.
Number of messages to be sent.
Number of prefixes received.
Time elapsed.
State machine of the peer.
213