Multicast-Vlan Entry-Limit; Port (Multicast Vlan View) - HP 3600 v2 Series Command Reference Manual

multicast-vlan entry-limit

Syntax
multicast-vlan entry-limit limit
undo multicast-vlan entry-limit
View
System view
Default level
2: System level
Parameters
limit: Specifies the maximum number of entries in an IGMP snooping forwarding table for multicast
VLANs. For the HP 3600 v2 EI switches, the value ranges from 0 to 2000. For the HP 3600 v2 SI
switches, the value ranges from 0 to 1024.
Description
Use multicast-vlan entry-limit to configure the maximum number of entries in an IGMP snooping
forwarding table for multicast VLANs.
Use undo multicast-vlan entry-limit to restore the default.
By default, the upper limit is 2000 for the HP 3600 v2 EI switches, and 1024 for the HP 3600 v2 SI
switches.
Related commands: entry-limit.
Examples
# Configure the IGMP snooping forwarding table of multicast VLANs to contain 512 entries at most.
<Sysname> system-view
[Sysname] multicast-vlan entry-limit 512

port (multicast VLAN view)

Syntax
port interface-list
undo port { all | interface-list }
View
Multicast VLAN view
Default level
2: System level
Parameters
interface-list: Specifies a port in the form of interface-type interface-number, or a port range in the form
of interface-type start-interface-number to interface-type end-interface-number, where the end interface
number must be greater than the start interface number.
all: Specifies all the ports in the current multicast VLAN.
46