Display Multicast Ipv6 Forwarding-Table Df-Info - HP 3600 v2 Series Command Reference Manual

display multicast ipv6 forwarding-table df-info

Syntax
display multicast ipv6 forwarding-table df-info [ rp-address ] [ slot slot-number ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
rp-address: Specifies an RP address of IPv6 BIDIR-PIM.
slot slot- number: Displays the DF information of the IPv6 multicast forwarding table for the specified IRF
member switch. The slot-number argument specifies the ID of an IRF member switch. The value range for
the argument depends on the number of member switches and their member IDs in the IRF fabric. If no
IRF fabric exists, the slot-number argument is the current device number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display multicast ipv6 forwarding-table df-info to display the DF information of the IPv6 multicast
forwarding table.
Examples
# Display the DF information of the IPv6 multicast forwarding table.
<Sysname> display multicast ipv6 forwarding-table df-info
IPv6 Multicast DF information
Total 1 RP
Total 1 RP matched
00001. RP Address: 2010::1
MID: 0, Flags: 0x2100000:0
Uptime: 00:08:32
RPF interface: Vlan-interface1
List of 1 DF interfaces:
1: Vlan-interface2
Table 65 Command output
Field
Total 1 RP
Description
Total number of RPs.
302