HP 3600 v2 Series Command Reference Manual page 97

Description
Use display igmp ssm-mapping group to display the multicast group information created based on the
configured IGMP SSM mappings.
If neither all-instance nor vpn-instance is specified, this command displays the information on the public
network.
Examples
# Display detailed information about multicast group 232.1.1.1 created based on the configured IGMP
SSM mappings on the public network.
<Sysname> display igmp ssm-mapping group 232.1.1.1 verbose
Interface group report information of VPN-Instance: public net
Vlan-interface1(10.10.10.10):
Total 1 IGMP SSM-mapping Group reported
Group: 232.1.1.1
Uptime: 00:00:31
Expires: off
Last reporter: 1.1.1.1
Version1-host-present-timer-expiry: off
Source list(Total 1 source):
Source: 1.1.1.1
Table 25 Command output
Field
Interface group report information of
VPN-Instance: public net
Total 1 IGMP SSM-mapping Group reported
Group
Uptime
Expires
Last reporter
Version1-host-present-timer-expiry
Source list(Total 1 source)
Source
Last-member-query-counter
Last-member-query-timer-expiry
Uptime: 00:00:31
Expires: 00:01:39
Last-member-query-counter: 0
Last-member-query-timer-expiry: off
Description
Multicast group information created based on IGMP SSM
mappings on a public network interface.
One IGMP SSM mapping multicast group was reported.
Multicast group address.
Length of time since the multicast group was reported.
Remaining time of the multicast group, where "off" means
that the multicast group never times out.
Address of the last host that reported its membership for
this multicast group.
Remaining time of the IGMPv1 host present timer, where
"off" means that the timer never expires.
Multicast source list (one multicast source).
Multicast source address.
Number of last-member queries sent.
Remaining time of the last-member query timer, where
"off" means that the timer never expires.
84