Hello-Option Holdtime (Pim View); Hello-Option Lan-Delay (Pim View) - HP 3600 v2 Series Command Reference Manual
Ip multicast
Hide thumbs
Also See for 3600 v2 Series:
- Command reference manual (510 pages) ,
- Configuration manual (441 pages) ,
- Security configuration manual (398 pages)
Table of Contents
Advertisement
<Sysname> system-view
[Sysname] pim
[Sysname-pim] hello-option dr-priority 3
# Set the router priority for DR election to 3 in VPN instance mvpn.
<Sysname> system-view
[Sysname] pim vpn-instance mvpn
[Sysname-pim-mvpn] hello-option dr-priority 3
hello-option holdtime (PIM view)
Syntax
hello-option holdtime interval
undo hello-option holdtime
View
Public network PIM view, VPN instance PIM view
Default level
2: System level
Parameters
interval: PIM neighbor timeout time in seconds, with an effective range of 1 to 65,535. A value of
65,535 makes the PIM neighbor always reachable.
Description
Use hello-option holdtime to configure the PIM neighbor timeout time.
Use undo hello-option holdtime to restore the default.
By default, the PIM neighbor timeout time is 105 seconds.
Related commands: pim hello-option holdtime.
Examples
# Set the global value of the PIM neighbor timeout time to 120 seconds in the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] hello-option holdtime 120
# Set the global value of the PIM neighbor timeout time to 120 seconds in VPN instance mvpn.
<Sysname> system-view
[Sysname] pim vpn-instance mvpn
[Sysname-pim-mvpn] hello-option holdtime 120
hello-option lan-delay (PIM view)
Syntax
hello-option lan-delay interval
undo hello-option lan-delay
146
Advertisement
Table of Contents
