Display Pim Ipv6 Claimed-Route - HP 3600 v2 Series Command Reference Manual

HoldTime: 80
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:48
Table 78 Command output
Field
Elected BSR Address
Candidate BSR Address
Priority
Hash mask length
State
Scope
Uptime
Next BSR message scheduled at
Candidate RP
Priority
HoldTime
Advertisement Interval
Next BSR message scheduled at

display pim ipv6 claimed-route

Syntax
display pim ipv6 claimed-route [ ipv6-source-address ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ipv6-source-address: Displays the information of the IPv6 unicast route to a particular IPv6 multicast
source. If you do not provide this argument, this command displays information about all IPv6 unicast
routes that IPv6 PIM uses.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
Description
IPv6 address of the elected BSR
Address of the candidate BSR
BSR priority
Hash mask length
BSR state
Scope of the BSR
Length of time since this BSR was elected
Remaining time of this BSR
Address of the C-RP
Priority of the C-RP
Timeout time of the C-RP
Interval between C-RP-Adv messages
Remaining time before the C-RP will send the next
C-RP-Adv message
362