Reset Bgp Ipv4 Multicast - HP 3600 v2 Series Command Reference Manual

ip-address: Specifies an IPv4 MBGP peer by its IP address.
group-name: Specifies an IPv4 MBGP peer group by its name, a string of 1 to 47 characters.
external: Soft-resets eBGP connections.
internal: Soft-resets iBGP connections.
export: Specifies an outbound soft reset.
import: Specifies an inbound soft reset.
Description
Use refresh bgp ipv4 multicast to perform a soft reset on specified IPv4 MBGP connections. This method
can also refresh the MBGP routing table and apply a new routing policy seamlessly.
To perform a BGP soft reset, be sure that all routers in the network support route refresh. If a router does
not support the route-refresh function, you must configure the peer keep-all-routes command to save all
the routing information of the peer before BGP soft reset.
Examples
# Soft-reset all the IPv4 MBGP connections.
<Sysname> refresh bgp ipv4 multicast all import

reset bgp ipv4 multicast

Syntax
reset bgp ipv4 multicast { all | as-number | ip-address | group group-name | external | internal }
View
User view
Default level
2: System level
Parameters
all: Resets all MBGP connections.
as-number: Resets MBGP connections to peers in the AS.
ip-address: Resets the connection with an IPv4 MBGP peer.
group group-name: Resets connections with the specified BGP peer group.
external: Resets all the multicast eBGP connections.
internal: Resets all the multicast iBGP connections.
Description
Use reset bgp ipv4 multicast to reset specified MBGP connections.
Examples
# Reset all the IPv4 MBGP connections.
<Sysname> reset bgp ipv4 multicast all
250