Display Bgp Network - HP 5920 Series Command Reference Manual

Field
Maximum number of prefixes
allowed
Threshold
Configured hold time
Keepalive time
Minimum time between
advertisements
Peer preferred value
Routing policy configured
Members
Peer
AS
MsgRcvd
MsgSent
OutQ
PrefRcv
Up/Down
State
IPsec profile name

display bgp network

Use display bgp network to display information about routes advertised by the network command and
shortcut routes configured by the network short-cut command.
Syntax
display bgp network { ipv4 | ipv6 } [ unicast ] [ vpn-instance vpn-instance-name ]
Description
Maximum number of routes allowed to learn from the peer.
This field does not apply to BGP L2VPN.
Percentage of received routes from the peer to maximum routes allowed
to learn from the peer. If the percentage is reached, the system
generates a log message.
This field does not apply to BGP L2VPN.
Configured Hold Interval in seconds.
Keepalive interval in seconds.
Minimum route advertisement interval in seconds.
Preferred value specified for routes from the peer.
This field does not apply to BGP L2VPN.
Routing policy configured for the peer group.
If no routing policy is specified, this field displays No routing policy is
configured.
This field does not apply to BGP L2VPN.
Information about peers included in the peer group.
IP or IPv6 address of the peer.
AS number of the peer.
Number of messages received.
Number of messages sent.
Number of messages to be sent.
For the IPv4, IPv6, VPNv4, and VPNv6 address families, this field
displays the number of prefixes received from the peer.
For MPLS L2VPN, this field displays the number of label blocks received
from the peer.
For VPLS, this field displays the total number of label blocks and VPLS
PEs discovered by BGP.
Lasting time of the current BGP session state.
Current state of the BGP session between the local router and the peer.
IPsec profile applied to the IPv6 BGP peer group.
285