HP 3600 v2 Series Command Reference Manual page 66
Ip multicast
Hide thumbs
Also See for 3600 v2 Series:
- Command reference manual (510 pages) ,
- Configuration manual (449 pages) ,
- Security configuration manual (398 pages)
Table of Contents
Advertisement
Table 10 Command output
Field
Total 1 entry
Total 1 entry matched
00001
(172.168.0.2,227.0.0.1)
MID
Flags
Uptime
Timeout in
Incoming interface
List of 1 outgoing interface:
1: Vlan-interface2
Matched 19648 packets(20512512
bytes), Wrong If 0 packets
Forwarded 19648 packets(20512512
bytes)
Table 11 Major values of the flags field (before the colon)
Value
0x1
0x2
0x4
0x8
0x10
0x400
0x8000
0x10000
0x80000
0x100000
Description
Total number of (S, G) entries in the multicast forwarding table.
Total number of matched (S, G) entries in the multicast forwarding
table.
Sequence number of the (S, G) entry.
An (S, G) entry of the multicast forwarding table.
(S, G) entry ID. Each (S, G) entry has a unique MID.
Current state of the (S, G) entry. Different bits indicate different
states of (S, G) entries. The flags field comprises two hexadecimal
numbers separated by a colon (:). Major values of the flags field
before the colon are described in
field after the colon is 0.
Length of time for which the (S, G) entry has been up, in
hours:minutes:seconds.
Length of time in which the (S, G) entry will expire, in
hours:minutes:seconds.
Incoming interface of the (S, G) entry. If the incoming interface is
an interface in another VPN, the VPN name is displayed.
Outgoing interface list
Interface number: outgoing interface and number. If the outgoing
interface is an interface in another VPN, the VPN name is
displayed.
(S, G)-matched packets (bytes), packets with incoming interface
errors.
(S, G)-forwarded packets (bytes).
Meaning
A register-stop message must be sent.
Whether the multicast source that corresponds to the (S, G) is active.
Null forwarding entry.
Whether the RP is a PIM domain border router.
A register outgoing interface is available.
(S, G) entry to be deleted.
The (S, G) entry is in the smoothening process after active/standby switchover.
The (S, G) has been updated during the smoothing process.
The (S, G) entry has been repeatedly updated and must be deleted before a new
entry is added.
An entry is successfully added.
53
Table
11. The value of the flags
Advertisement
Table of Contents
