HP 3600 v2 Series Command Reference Manual page 86

Vlan(id):2.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port unit board: Mask(0x0000)
Router port(s):total 1 port(s).
Eth1/0/1
IP group(s):the following ip group(s) match to one mac group.
IP group address:224.1.1.1
(1.1.1.1, 224.1.1.1):
Attribute:
Host port unit board: Mask(0x0000)
Host port(s):total 1 port(s).
Eth1/0/2
MAC group(s):
MAC group address:0100-5e01-0101
Host port unit board: Mask(0x0000)
Host port(s):total 1 port(s).
Eth1/0/2
Table 18 Command output
Field
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port,
S-Static port, C-Copy port
Subvlan flags: R-Real VLAN,
C-Copy VLAN
Router port(s)
Router port unit board
( 00:01:30 )
IP group address
MAC group address
Attribute
Host port unit board
Host port(s)
(D) ( 00:01:30 )
Host Port
(D) ( 00:03:23 )
Description
Total number of IP multicast groups.
Total number of IP multicast sources.
Total number of MAC multicast groups.
Port flags: D for a dynamic port, S for a static port, and C for a port copied
from a (*, G) entry to an (S, G) entry.
Sub-VLAN flags: R for a real egress sub-VLAN under the current entry, and C
for a sub-VLAN copied from a (*, G) entry to an (S, G) entry.
Number of router ports.
Mask indicating an IRF member switch with a router port residing on it. If no
IRF fabric exists, Mask (0x0000) is displayed.
Remaining time of the aging timer for the dynamic member port or router port.
On an IRF member switch, to display the remaining life of a non-aggregation
port that does not belong to the Master switch, you must specify the member ID
of the IRF member switch by using slot slot-number. This is not required for an
aggregation port.
Address of the IP multicast group.
Address of the MAC multicast group.
Attribute of the IP multicast group.
Mask indicating an IRF member switch with a member port residing on it. If no
IRF fabric exists, Mask(0x0000) is displayed
Number of member ports.
73