Holdtime Assert (Ipv6 Pim View); Holdtime Join-Prune (Ipv6 Pim View) - HP 3600 v2 Series Command Reference Manual

Parameters
interval: Prune override interval in milliseconds, with an effective range of 1 to 65,535.
Description
Use hello-option override-interval to configure the global value of the prune override interval.
Use undo hello-option override-interval to restore the default.
By default, the prune override interval is 2500 milliseconds.
Related commands: hello-option lan-delay, pim ipv6 hello-option lan-delay, and pim ipv6 hello-option
override-interval.
Examples
# Set the prune override interval to 2000 milliseconds globally.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] hello-option override-interval 2000

holdtime assert (IPv6 PIM view)

Syntax
holdtime assert interval
undo holdtime assert
View
IPv6 PIM view
Default level
2: System level
Parameters
interval: Assert timeout time in seconds, with an effective range of 7 to 2,147,483,647.
Description
Use holdtime assert to configure the global value of the assert timeout time.
Use undo holdtime assert to restore the default.
By default, the assert timeout time is 180 seconds.
Related commands: holdtime join-prune, pim ipv6 holdtime assert, and pim ipv6 holdtime join-prune.
Examples
# Set the global value of the assert timeout time to 100 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] holdtime assert 100

holdtime join-prune (IPv6 PIM view)

Syntax
holdtime join-prune interval
381