Mbgp Configuration Commands (Available Only On The Hp 3600 V2 Ei); Aggregate (Mbgp Address Family View) - HP 3600 v2 Series Command Reference Manual

MBGP configuration commands (available only
on the HP 3600 v2 EI)
The term "router" in this chapter refers to both routers and Layer 3 switches.
For more information about routing policy commands, see Layer 3—IP Routing Command Reference.

aggregate (MBGP address family view)

Syntax
aggregate ip-address { mask | mask-length } [ as-set | attribute-policy route-policy-name |
detail-suppressed | origin-policy route-policy-name | suppress-policy route-policy-name ] *
undo aggregate ip-address { mask | mask-length }
View
IPv4 MBGP address family view
Default level
2: System level
Parameters
ip-address: Specifies a summary address.
mask: Specifies the summary mask, in dotted decimal notation.
mask-length: Specifies the summary mask length, in the range of 0 to 32.
as-set: Creates a summary with AS set.
attribute-policy route-policy-name: Sets the attributes of the summary route according to the routing
policy. The routing policy name is a case-sensitive string of 1 to 63 characters.
detail-suppressed: Advertises the summary route only.
suppress-policy route-policy-name: Suppresses specific routes defined in the routing policy. The routing
policy name is a case-sensitive string of 1 to 63 characters.
origin-policy route-policy-name: References the routing policy to determine routes for summarization. The
routing policy name is a case-sensitive string of 1 to 63 characters.
The keywords of the command are described as follows:
Table 42 Functions of the keywords
Keywords
as-set
Function
Used to create a summary route, whose AS path contains the AS path
information of summarized routes. Use this keyword carefully when
many AS paths must be summarized, because the frequent changes of
these specific routes might lead to route flaps.
200