Host-Tracking (Mld-Snooping View) - HP 3600 v2 Series Command Reference Manual

Parameters
interval: Specifies an aging timer for dynamic member ports in seconds. The value range is 200 to 1000.
Description
Use host-aging-time to set the aging timer for dynamic member ports globally.
Use undo host-aging-time to restore the default.
By default, the aging timer of a dynamic member port is 260 seconds.
This command takes effect only in MLD snooping-enabled VLANs.
Related commands: mld-snooping host-aging-time.
Examples
# Set the aging timer for dynamic member ports to 300 seconds globally.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] host-aging-time 300

host-tracking (MLD-snooping view)

Syntax
host-tracking
undo host-tracking
View
MLD-snooping view
Default level
2: System level
Parameters
None
Description
Use host-tracking to enable the MLD snooping host tracking function globally.
Use undo host-tracking to disable the MLD snooping host tracking function globally.
By default, this function is disabled.
This command takes effect only in MLD snooping-enabled VLANs.
Related commands: display mld-snooping host and mld-snooping host-tracking.
Examples
# Enable the MLD snooping host tracking function globally.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] host-tracking
261