Display Mld Interface - HP 3600 v2 Series Command Reference Manual

Field
Uptime
Expires

display mld interface

Syntax
display mld interface [ interface-type interface-number ] [ verbose ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify any
interface, this command displays information about all interfaces that runs MLD.
verbose: Displays detailed MLD configuration and operation information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display mld interface to display MLD configuration and operation information on the specified
interface or all MLD-enabled interfaces.
Examples
# Display detailed MLD configuration and operation information on VLAN-interface1 (downstream
interface).
<Sysname> display mld interface vlan-interface 1 verbose
Vlan-interface1(FE80::200:AFF:FE01:101):
MLD is enabled
Current MLD version is 1
Value of query interval for MLD(in seconds): 125
Value of other querier present interval for MLD(in seconds): 255
Value of maximum query response time for MLD(in seconds): 10
Value of last listener query interval(in seconds): 1
Value of startup query interval(in seconds): 31
Value of startup query count: 2
General query timer expiry (hours:minutes:seconds): 00:00:23
Querier for MLD: FE80::200:AFF:FE01:101 (this router)
Description
Host running duration
Host expiration time, where "timeout" means that the host has expired
318