Display Mld Routing-Table - HP 3600 v2 Series Command Reference Manual

Expires: 00:00:02
Source list (total 1 source(s))
Source: 30::1
Table 73 Command output
Field
Proxying group record(s) information
Total 1 MLD-Proxying group record(s)
Group
Member state
Expires
Group mode
Source list

display mld routing-table

Syntax
display mld routing-table [ ipv6-source-address [ prefix-length ] | ipv6-group-address [ prefix-length ] |
flags { act | suc } ] * [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ipv6-source-address: Specifies a multicast source by its IPv6 address.
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address, in the form of FFxy::/16,
where x and y represent any hexadecimal number ranging from 0 to F.
prefix-length: Prefix length of the multicast source or multicast group address. For a multicast source
address, this argument has an effective value range of 0 to 128. For a multicast group address, it has an
effective value range of 8 to 128. The default is 128 in both cases.
flags: Specifies the route flag.
act: Specifies the MLD routes with the ACT flag
suc: Specifies the MLD routes with the SUC flag.
Description
Information of MLD proxying groups on the interfaces.
One MLD proxying group is recorded.
IPv6 multicast group address.
State of the member hosts:
•
Delay.
•
Idle.
Remaining time of the IPv6 multicast group, where
"off" means that the group never times out.
IPv6 multicast source filtering modes:
•
Include.
•
Exclude.
List of IPv6 multicast sources (only including the
sources from which the hosts want to receive IPv6
multicast data).
321