Pim Ipv6 Bsr-Boundary; Pim Ipv6 Dm - HP 3600 v2 Series Command Reference Manual

<Sysname> system-view
[Sysname] multicast ipv6 routing-enable
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim ipv6 sm
[Sysname-Vlan-interface100] pim ipv6 bfd enable

pim ipv6 bsr-boundary

Syntax
pim ipv6 bsr-boundary
undo pim ipv6 bsr-boundary
View
Interface view
Default level
2: System level
Parameters
None
Description
Use pim ipv6 bsr-boundary to configure an IPv6 PIM domain border, namely, a bootstrap message
boundary.
Use undo pim ipv6 bsr-boundary to remove the configured IPv6 PIM domain border.
By default, no PIM domain border is configured.
Related commands: c-bsr and multicast ipv6 boundary.
Examples
# Configure VLAN-interface 100 as a PIM domain border.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim ipv6 bsr-boundary

pim ipv6 dm

Syntax
pim ipv6 dm
undo pim ipv6 dm
View
Interface view
Default level
2: System level
Parameters
None
385