Report-Aggregation (Igmp-Snooping View) - HP 3600 v2 Series Command Reference Manual

Description
Use overflow-replace to enable the multicast group replacement function globally.
Use undo overflow-replace to disable the multicast group replacement function globally.
By default, the multicast group replacement function is disabled.
For the HP 3600 v2 EI switches, this command takes effect in both IGMP snooping-enabled VLANs and
VLANs with IGMP enabled on their VLAN interfaces.
For the HP 3600 v2 SI switches, this command takes effect in IGMP snooping-enabled VLANs.
Related commands: igmp-snooping overflow-replace.
Examples
# Enable the multicast group replacement function globally in VLAN 2.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] overflow-replace vlan 2

report-aggregation (IGMP-snooping view)

Syntax
report-aggregation
undo report-aggregation
View
IGMP-snooping view
Default level
2: System level
Parameters
None
Description
Use report-aggregation to enable IGMP report suppression.
Use undo report-aggregation to disable IGMP report suppression.
By default, IGMP report suppression is enabled.
For the HP 3600 v2 EI switches, this command takes effect in both IGMP snooping-enabled VLANs and
VLANs with IGMP enabled on their VLAN interfaces.
For the HP 3600 v2 SI switches, this command takes effect in IGMP snooping-enabled VLANs.
Examples
# Disable IGMP report suppression.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] undo report-aggregation
35