Examples
# Display the detailed information of the IPv4 MBGP peer 10.1 10.25.20.
<Sysname> display bgp multicast peer 10.110.25.20 verbose
Peer: 10.110.25.20 Local: 2.2.2.2
Type: eBGP link
BGP version 4, remote router ID 1.1.1.1
BGP current state: Established, Up for 00h01m51s
BGP current event: RecvKeepalive
BGP last state: OpenConfirm
Port:
Configured: Active Hold Time: 180 sec
Received
Negotiated: Active Hold Time: 180 sec
Peer optional capabilities:
Peer support bgp multi-protocol extended
Peer support bgp route refresh capability
Peer support bgp route AS4 capability
Address family IPv4 Unicast: advertised and received
Address family IPv4 Multicast: advertised and received
Received: Total 5 messages, Update messages 1
Sent: Total 4 messages, Update messages 0
Maximum allowed prefix number: 4294967295
Threshold: 75%
Minimum time between advertisement runs is 30 seconds
Optional capabilities:
Route refresh capability has been enabled
ORF advertise capability based on prefix (type 64):
Local: both
Negotiated: send
Peer Preferred Value: 0
BFD: Enabled
Routing policy configured:
No routing policy is configured
Table 48 Command output
Field
Peer
Local
Type
BGP version
remote router ID
BGP current state
BGP current event
Local - 1029
Remote - 179
: Active Hold Time: 180 sec
Keepalive Time: 60 sec
Keepalive Time: 60 sec
Description
IP address of the peer.
Local router ID.
Peer type.
BGP version.
Router ID of the peer.
Current state of the peer.
Current event of the peer.
216