Dscp (Mld View) - HP 3600 v2 Series Command Reference Manual

|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display mld ssm-mapping host interface to display information about the hosts that join based on the
MLD SSM mappings on the specified interface.
Examples
# Displays information about the hosts that join multicast source group (10::1, FF1E::101) based on the
MLD SSM mappings on layer 3 Ethernet port Ethernet1/0/1.
<Sysname> display mld ssm-mapping host interface ethernet 1/0/1 group ff1e::101 source
10::1
Ethernet1/0/1(1::1):
(10::1, FF1E::101)
Host
1::1
2::2
Table 77 Command output
Field
Ethernet1/0/1(1::1)
(10::1, FF1E::101)
Host
Uptime
Expires

dscp (MLD view)

Syntax
dscp dscp-value
undo dscp
View
MLD view
Default level
2: System level
Parameters
dscp-value: Specifies the DSCP value for MLD messages, in the range of 0 to 63.
Description
Interface and IPv6 address
(S, G) entry
Host IPv6 address
Host running duration
Host expiration time, where "timeout" means that the host has expired
326
Uptime Expires
00:02:20 00:00:40
00:02:21 00:00:39