HP 3600 v2 Series Command Reference Manual page 151

Description
Use display pim neighbor to display the PIM neighbor information.
If neither all-instance nor vpn-instance is specified, this command displays information about all PIM
neighbors in the public network.
Examples
# Display information about all PIM neighbors in the public network.
<Sysname> display pim neighbor
VPN-Instance: public net
Total Number of Neighbors = 2
Neighbor
10.1.1.2
20.1.1.2
# In the public network, view the detailed information of the PIM neighbor whose IP address is
1 1.1 10.0.20.
<Sysname> display pim neighbor 11.110.0.20 verbose
VPN-Instance: public net
Neighbor: 11.110.0.20
Interface: Vlan-interface3
Uptime: 00:00:10
Expiry time: 00:00:30
DR Priority: 1
Generation ID: 0x2ACEFE15
Holdtime: 105 s
LAN delay: 500 ms
Override interval: 2500 ms
State refresh interval: 60 s
Neighbor tracking: Disabled
Bidirectional PIM: Disabled
Table 35 Command output
Field
VPN-Instance: public net
Total Number of Neighbors
Neighbor
Interface
Uptime
Expires/Expiry time
Dr-Priority/DR Priority
Mode
Generation ID
Interface
Vlan1
Vlan2
Description
Public network.
Total number of PIM neighbors.
IP address of the PIM neighbor.
Interface that connects to the PIM neighbor.
Length of time for which the PIM neighbor has been up, in hh:mm:ss.
Remaining time of the PIM neighbor, in hh:mm:ss. "Never" means that the
PIM neighbor is always up and reachable.
Priority of the PIM neighbor.
Mode of the PIM neighbor. The value "B" means the BIDIR-PIM mode. If
nothing is displayed, it means the non-BIDIR-PIM mode.
Generation ID of the PIM neighbor. (A random value that indicates a status
change of the PIM neighbor.)
Uptime Expires Dr-Priority
02:50:49 00:01:31 1
02:49:39 00:01:42 1
138
Mode
B
B