Igmp-Snooping Source-Deny - HP 3600 v2 Series Command Reference Manual

For the HP 3600 v2 EI switches, this command takes effect in both IGMP snooping-enabled VLANs and
VLANs with IGMP enabled on their VLAN interfaces.
For the HP 3600 v2 SI switches, this command takes effect in IGMP snooping-enabled VLANs.
If you do not specify any VLAN when using this command in Layer 2 Ethernet interface view or Layer 2
aggregate interface view, the command takes effect for all VLANs that the interface belongs to. If you
specify one or more VLANs, the command takes effect for the specified VLANs that the interface belongs
to.
If you do not specify any VLAN when using this command in port group view, the command takes effect
on all the ports in this group. If you specify one or more VLANs, the command takes effect only on those
ports in this group that belong to the specified VLANs.
Examples
# Disable Ethernet 1/0/1 from becoming a dynamic router port in VLAN 2.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] igmp-snooping router-port-deny vlan 2

igmp-snooping source-deny

Syntax
igmp-snooping source-deny
undo igmp-snooping source-deny
View
Layer 2 Ethernet interface view, port group view
Default level
2: System level
Parameters
None
Description
Use igmp-snooping source-deny to enable multicast source port filtering.
Use undo igmp-snooping source-deny to disable multicast source port filtering.
By default, multicast source port filtering is disabled.
For the HP 3600 v2 EI switches, this command takes effect in both IGMP snooping-enabled VLANs and
VLANs with IGMP enabled on their VLAN interfaces.
For the HP 3600 v2 SI switches, this command takes effect in IGMP snooping-enabled VLANs.
Examples
# Enable source port filtering for multicast data on Ethernet 1/0/1.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] igmp-snooping source-deny
28