Pim Ipv6 Hello-Option Neighbor-Tracking; Pim Ipv6 Hello-Option Override-Interval - HP 3600 v2 Series Command Reference Manual
Ip multicast
Hide thumbs
Also See for 3600 v2 Series:
- Command reference manual (510 pages) ,
- Configuration manual (449 pages) ,
- Security configuration manual (398 pages)
Table of Contents
Advertisement
Related commands: hello-option lan-delay, hello-option override-interval, and pim ipv6 hello-option
override-interval.
Examples
# Set the LAN-delay time to 200 milliseconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim ipv6 hello-option lan-delay 200
pim ipv6 hello-option neighbor-tracking
Syntax
pim ipv6 hello-option neighbor-tracking
undo pim ipv6 hello-option neighbor-tracking
View
Interface view
Default level
2: System level
Parameters
None
Description
Use pim ipv6 hello-option neighbor-tracking to disable join suppression—namely, to enable neighbor
tracking—on the current interface.
Use undo pim ipv6 hello-option neighbor-tracking to enable join suppression.
By default, join suppression is enabled. Namely, neighbor tracking is disabled.
Related commands: hello-option neighbor-tracking.
Examples
# Disable join suppression on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim ipv6 hello-option neighbor-tracking
pim ipv6 hello-option override-interval
Syntax
pim ipv6 hello-option override-interval interval
undo pim ipv6 hello-option override-interval
View
Interface view
Default level
2: System level
388
Advertisement
Table of Contents
