HP 3600 v2 Series Command Reference Manual page 84

If neither all-instance nor vpn-instance is specified, this command displays the IGMP group information
on the public network.
Examples
# Display the dynamic group entries of IGMP groups on all interfaces on the public network.
<Sysname> display igmp group
Total 3 IGMP Group(s).
Interface group report information of VPN-Instance: public net
Vlan-interface1(10.10.1.20):
Total 3 IGMP Groups reported
Group Address
225.1.1.1
225.1.1.3
225.1.1.2
# Display detailed information about the dynamic entries of IGMP group 225.1.1.1 on the public network.
<Sysname> display igmp group 225.1.1.1 verbose
Interface group report information of VPN-Instance: public net
Vlan-interface1(10.10.1.20):
Total 3 IGMP Groups reported
Group: 225.1.1.1
Uptime: 00:00:34
Expires: 00:00:40
Last reporter: 10.10.1.10
Last-member-query-counter: 0
Last-member-query-timer-expiry: off
Group mode: exclude
Version1-host-present-timer-expiry: off
Version2-host-present-timer-expiry: off
Table 17 Command output
Field
Interface group report information of
VPN-Instance: public net
Group
Uptime
Expires
Last reporter
Last-member-query-counter
Last-member-query-timer-expiry
Group mode
Last Reporter Uptime
10.10.1.10 00:02:04
10.10.1.10 00:02:04
10.10.1.10 00:02:04
Description
IGMP group information on a public network interface.
Multicast group address.
Length of time since the multicast group was reported.
Remaining time of the multicast group, where "off" means that
the multicast group never times out.
Address of the last host that reported its membership for this
multicast group.
Number of last-member queries sent.
Remaining time of the last-member query timer, where "off"
means that the timer never expires.
Multicast source filtering modes:
•
•
This field is displayed only when the switch is running IGMPv3.
Expires
00:01:15
00:01:15
00:01:17
Include.
Exclude.
71