Pim Holdtime Join-Prune; Pim Neighbor-Policy - HP 3600 v2 Series Command Reference Manual
Ip multicast
Hide thumbs
Also See for 3600 v2 Series:
- Command reference manual (510 pages) ,
- Configuration manual (449 pages) ,
- Security configuration manual (398 pages)
Table of Contents
Advertisement
Related commands: holdtime assert, holdtime join-prune, and pim holdtime join-prune.
Examples
# Set the assert timeout time to 100 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim holdtime assert 100
pim holdtime join-prune
Syntax
pim holdtime join-prune interval
undo pim holdtime join-prune
View
Interface view
Default level
2: System level
Parameters
interval: Join/prune timeout time in seconds, with an effective range of 1 to 65,535.
Description
Use pim holdtime join-prune to configure the join/prune timeout time on the interface.
Use undo pim holdtime join-prune to restore the default.
By default, the join/prune timeout time is 210 seconds.
Related commands: holdtime assert, holdtime join-prune, and pim holdtime assert.
Examples
# Set the join/prune timeout time to 280 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim holdtime join-prune 280
pim neighbor-policy
Syntax
pim neighbor-policy acl-number
undo pim neighbor-policy
View
Interface view
Default level
2: System level
158
Advertisement
Table of Contents
