HP 3600 v2 Series Command Reference Manual page 143

state-refresh: Displays the number of state refresh messages.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display pim control-message counters to display statistics for PIM control messages.
If neither all-instance nor vpn-instance is specified, this command displays statistics for PIM control
messages on the public network.
Examples
# Display statistics for PIM control messages on all interfaces on the public network.
<Sysname> display pim control-message counters
VPN-Instance: public net
PIM global control-message counters:
Register
Register-Stop
Probe
PIM control-message counters for interface: Vlan-interface1
Assert
Graft
Graft-Ack
Hello
Join/Prune
State-Refresh
BSR
C-RP
Table 29 Command output
Field
VPN-Instance: public net
PIM global control-message counters
PIM control-message counters for interface
Received
Sent
Invalid
Register
Register-Stop
Received Sent
20 37
25 20
10 5
Received Sent
10 5
20 37
25 20
1232 453
15 30
8 7
3243 589
53 32
Invalid
2
1
0
Invalid
0
2
1
0
21
1
1
0
Description
Public network
Statistics for PIM global control messages
Interface for which PIM control messages were counted
Number of messages received
Number of messages sent
Number of invalid messages
Register messages
Register-stop messages
130