Display Pim Ipv6 Rp-Info - HP 3600 v2 Series Command Reference Manual

Field
(2001::2, FFE3::101)
RP
Protocol
Flag
Uptime
Upstream interface
Upstream neighbor
RPF prime neighbor
Downstream interface(s) information

display pim ipv6 rp-info

Syntax
display pim ipv6 rp-info [ ipv6-group-address ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Description
(S, G) entry in the IPv6 PIM routing table.
IP address of the RP.
IPv6 PIM mode.
Flag of the (S, G) or (*, G) entry in the IPv6 PIM routing table:
•
ACT—The entry has been used for routing data.
•
BIDIR—The entry was created by IPv6 BIDIR-PIM.
•
DEL—The entry will be removed.
•
EXPRUNE—Some outgoing interfaces are pruned by other IPv6
multicast routing protocols.
•
EXT—The entry contains outgoing interfaces provided by other IPv6
multicast routing protocols.
•
LOC—The entry is on a router directly connected to the same subnet
with the IPv6 multicast source.
•
NIIF—The entry contains unknown incoming interfaces.
•
NONBR—The entry has an IPv6 PIM neighbor searching failure.
•
RPT—The entry is on a RPT branch where (S, G) prunes have been
sent to the RP.
•
SPT—The entry is on the SPT.
•
SWT—The entry is in the process of RPT-to-SPT switchover.
•
WC—The entry is a wildcard routing entry.
Length of time since the (S, G) or (*, G) entry was installed.
Upstream (incoming) interface of the (S, G) or (*, G) entry.
Upstream neighbor of the (S, G) or (*, G) entry.
RPF neighbor of the (S, G) or (*, G) entry.
•
For a (*, G) entry, if this router is the RP, the RPF neighbor of this (*,
G) entry is NULL.
•
For a (S, G) entry, if this router directly connects to the IPv6 multicast
source, the RPF neighbor of this (S, G) entry is NULL.
Information of the downstream interfaces, including the following:
•
Number of downstream interfaces.
•
Downstream interface name.
•
Protocol type configured on the downstream interface.
•
Uptime of the downstream interfaces.
•
Expiry time of the downstream interfaces.
375