Static-Rpf-Peer - HP 3600 v2 Series Command Reference Manual
Ip multicast
Hide thumbs
Also See for 3600 v2 Series:
- Command reference manual (510 pages) ,
- Configuration manual (449 pages) ,
- Security configuration manual (398 pages)
Table of Contents
Advertisement
undo shutdown peer-address
View
Public network MSDP view, VPN instance MSDP view
Default level
2: System level
Parameters
peer-address: MSDP peer address.
Description
Use shutdown to terminate the connection with the specified MSDP peer.
Use undo shutdown to re-activate the connection with the specified MSDP peer.
By default, the connections with all MSDP peers are active.
Related commands: display msdp peer-status.
Examples
# Terminate the connection with the MSDP peer 125.10.7.6 on the public network.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] shutdown 125.10.7.6
# Terminate the connection with the MSDP peer 125.10.7.6 in VPN instance mvpn.
<Sysname> system-view
[Sysname] msdp vpn-instance mvpn
[Sysname-msdp-mvpn] shutdown 125.10.7.6
static-rpf-peer
Syntax
static-rpf-peer peer-address [ rp-policy ip-prefix-name ]
undo static-rpf-peer peer-address
View
Public network MSDP view, VPN instance MSDP view
Default level
2: System level
Parameters
peer-address: MSDP peer address.
rp-policy ip-prefix-name: Specifies a filtering policy based on the RP address in SA messages, where
ip-prefix-name is the filtering policy name, a case-sensitive string of 1 to 19 characters.
Description
Use static-rpf-peer to configure a static RPF peer.
Use undo static-rpf-peer to remove a static RPF peer.
No static RPF peer is configured by default.
197
Advertisement
Table of Contents
