Display Igmp Host Port-Info - HP 3600 v2 Series Command Reference Manual
Ip multicast
Hide thumbs
Also See for 3600 v2 Series:
- Command reference manual (510 pages) ,
- Configuration manual (449 pages) ,
- Security configuration manual (398 pages)
Table of Contents
Advertisement
Field
Ethernet1/0/1(192.168.1.1)
(0.0.0.0, 224.1.1.1)
Host
Uptime
Expires
display igmp host port-info
Syntax
display igmp host port-info vlan vlan-id group group-address [ source source-address ] [ slot slot-number ]
[ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vlan vlan-id: Displays information about the hosts tracked by IGMP on the Layer 2 ports in the specified
VLAN, where vlan-id is in the range of 1 to 4094.
group group-address: Displays information about the hosts tracked by IGMP that join in the specified
IGMP group on the Layer 2 ports. group-address is in the range of 224.0.1.0 to 239.255.255.255.
source source-address: Displays information about the hosts tracked by IGMP that join in the specified
multicast source on the Layer 2 ports, where source-address is a valid unicast address or 0.0.0.0. A
source IP address of 0.0.0.0 specifies all multicast sources.
slot slot-number: Displays information about the hosts tracked by IGMP on the Layer 2 ports on the
specified IRF member switch. The slot-number argument specifies the ID of an IRF member switch. The
value range for the argument depends on the number of member switches and their member IDs in the
IRF fabric. If no IRF fabric exists, the slot-number argument is the current device number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display igmp host port-info to display information about the hosts tracked by IGMP on the Layer 2
ports.
Examples
# Display information about the hosts tracked by IGMP that join in IGMP group 224.1.1.1 on the Layer 2
ports in VLAN 2.
Description
Interface and IP address
(S, G) entry, where 0.0.0.0 indicates all multicast sources
Host IP address
Host running duration
Host expiration time, where timeout means that the host has expired
75
Advertisement
Table of Contents
