HP 3600 v2 Series Command Reference Manual page 386

incoming-interface: Displays routing entries that contain the specified interface as the incoming
interface.
interface-type interface-number: Specifies an interface by its type and number.
register: Specifies the register interface. This keyword is valid only if mode-type is not specified or is sm.
outgoing-interface: Displays routing entries that contain the specified interface as the outgoing interface.
include: Displays routing entries, where the outgoing interface list includes the specified interface.
exclude: Displays routing entries, where the outgoing interface list excludes the specified interface.
match: Displays routing entries, where the outgoing interface list includes only the specified interface.
mode mode-type: Specifies an IPv6 PIM mode, where mode-type can have the following values:
• dm: Specifies IPv6 PIM-DM.
sm: Specifies IPv6 PIM-SM.
•
ssm: Specifies IPv6 PIM-SSM.
•
flags flag-value: Displays IPv6 PIM routing entries that contain the specified flags. The values of flag-value
and their meanings are as follows:
act: Specifies IPv6 multicast routing entries that have been used for routing data.
•
bidir: Specifies IPv6 multicast routing entries created by IPv6 BIDIR-PIM.
•
del: Specifies IPv6 multicast routing entries scheduled to be deleted.
•
• exprune: Specifies multicast routing entries that contain outgoing interfaces pruned by other IPv6
multicast routing protocols.
ext: Specifies IPv6 routing entries that contain outgoing interfaces provided by other IPv6 multicast
•
routing protocols.
loc: Specifies IPv6 multicast routing entries on that devices that directly connect to the same subnet
•
as the IPv6 multicast source.
• niif: Specifies IPv6 multicast routing entries that contain unknown incoming interfaces.
nonbr: Specifies routing entries with IPv6 PIM neighbor searching failure.
•
• rpt: Specifies routing entries on RPT branches where (S, G) prunes have been sent to the RP.
spt: Specifies routing entries on the SPT.
•
swt: Specifies routing entries in the process of RPT-to-SPT switchover.
•
• wc: Specifies wildcard routing entries.
fsm: Displays the information of the state machine.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display pim ipv6 routing-table to display IPv6 PIM routing table information.
Related commands: display ipv6 multicast routing-table.
373