Table 48 Command output
BGP peer group
Maximum number of prefixes
Configured hold time
Minimum time between
Peer preferred value
Routing policy configured
display bgp network
Use display bgp network to display information about routes advertised by the network command and
shortcut routes configured by the network short-cut command.
MsgSent OutQ PrefRcv Up/Down
Name of the BGP peer group.
AS number of the peer group.
Type of the peer groups:
external—IBGP peer group.
internal—EBGP peer group.
Maximum number of routes allowed to learn from the peer.
Percentage of received routes from the peer to maximum routes allowed
to learn from the peer. If the percentage is reached, the system
generates alarm messages.
Configured Hold Interval in seconds.
Keepalive interval in seconds.
Minimum route advertisement interval in seconds.
Preferred value specified for the routes from the peer.
Routing policy configured for the peer group.
If no routing policy is specified, this field displays No routing policy is
Information of the peers included in the peer group.
IPv6 address of the peer.
AS number of the peer.
Number of messages received.
Number of messages sent.
Number of messages to be sent.
Number of prefixes received.
Lasting time of the current BGP session state.
Current state of the BGP session between the local router and the peer.
0 00:00:40 Established