Display Pim Control-Message Counters - HP 3600 v2 Series Command Reference Manual

Field
Referenced route type
RPF-route selecting rule
The (S,G) or (*,G) list dependent on this route entry

display pim control-message counters

Syntax
display pim [ all-instance | vpn-instance vpn-instance-name ] control-message counters [ message-type
{ probe | register | register-stop } | [ interface interface-type interface-number | message-type { assert
| bsr | crp | graft | graft-ack | hello | join-prune | state-refresh } ] * ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all-instance: Specifies all VPN instances.
vpn-instance vpn-instance-name: Specifies a VPN, where vpn-instance-name is a case-sensitive string of
1 to 31 characters.
probe: Displays the number of null register messages.
register: Displays the number of register messages.
register-stop: Displays the number of register-stop messages.
interface interface-type interface-number: Displays the number of PIM control messages on the specified
interface.
assert: Displays the number of assert messages.
bsr: Displays the number of bootstrap messages.
crp: Displays the number of C-RP-Adv messages.
graft: Displays the number of graft messages.
graft-ack: Displays the number of graft-ack messages.
hello: Displays the number of hello messages.
join-prune: Displays the number of join/prune messages.
Description
Type of the referenced route:
•
igp—IGP unicast route.
•
egp—EGP unicast route.
•
unicast (direct)—Direct unicast route.
•
unicast—Other unicast route (such as static unicast
route).
•
mbgp—MBGP route.
•
multicast static—Static multicast route.
Rule of RPF route selection.
(S,G) or (*, G) entry list dependent on this RPF route.
129