Mld-Snooping Static-Router-Port - HP 3600 v2 Series Command Reference Manual

Default level
2: System level
Parameters
ipv6-group-address: Specifies the address of the IPv6 multicast group that the port will join as a static
member port. The value ranges from FFxy::/16—excluding FFx0::/16, FFx1::/16, FFx2::/16 and FF0y::,
where x and y represent any hexadecimal number between 0 and F, inclusive.
ipv6-source-address: Specifies the address of the IPv6 multicast source that the port will join as a static
member port.
vlan vlan-id: Specifies the VLAN that comprises the Ethernet ports, where vlan-id is in the range of 1 to
4094.
Description
Use mld-snooping static-group to configure the static IPv6 (*, G) or (S, G) joining function, that is, to
configure the port as a static member port of an IPv6 multicast group or source and group.
Use undo mld-snooping static-group to restore the default.
By default, no ports are static member ports.
The source-ip ipv6-source-address option in the command is meaningful only for MLDv2 snooping. If
MLDv1 snooping is running, the source-ip ipv6-source-address option does not take effect although you
can include source-ip ipv6-source-address in the command.
In Layer 2 Ethernet interface view or Layer 2 aggregate interface view, this command takes effect only if
the interface belongs to the specified VLAN. In port group view, this command takes effect only on those
ports in this port group that belong to the specified VLAN.
Examples
# Configure Ethernet 1/0/1 in VLAN 2 as a static member port for (2002::22, FF3E::101).
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping version 2
[Sysname-vlan2] quit
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] mld-snooping static-group ff3e::101 source-ip 2002::22 vlan 2

mld-snooping static-router-port

Syntax
mld-snooping static-router-port vlan vlan-id
undo mld-snooping static-router-port vlan vlan-id
View
Layer 2 Ethernet interface view, Layer 2 aggregate interface view, port group view
Default level
2: System level
282