Display Pim Rp-Info - HP 3600 v2 Series Command Reference Manual

Field
Downstream interface(s)
information

display pim rp-info

Syntax
display pim [ all-instance | vpn-instance vpn-instance-name ] rp-info [ group-address ] [ | { begin |
exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all-instance: Specifies all VPN instances.
vpn-instance vpn-instance-name: Specifies a VPN, where vpn-instance-name is a case-sensitive string of
1 to 31 characters.
group-address: Specifies the address of a multicast group, in the range of 224.0.1.0 to 239.255.255.255.
If you do not provide a group address, this command displays information about the RPs that correspond
to all multicast groups.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display pim rp-info to display the RP information.
If neither all-instance nor vpn-instance is specified, this command displays information about RPs in the
public network.
The RP information includes the information of RPs dynamically found by the BSR mechanism and static
RPs.
Description
Information of the downstream interfaces, including the following:
•
Number of downstream interfaces.
•
Downstream interface name. If the downstream interface is an
interface of another VPN, the VPN name is displayed.
•
Protocol type on the downstream interfaces. If the downstream
interface is an interface of another VPN, extra_vpn is displayed.
•
Uptime of the downstream interfaces.
•
Expiry time of the downstream interfaces.
143