Display Pim Rp-Info - HP 5900 Series Command Reference Manual

Ip multicast
Hide thumbs Also See for 5900 Series:
Table of Contents

Advertisement

Field
Flag
Uptime
Upstream interface
Upstream neighbor
RPF prime neighbor
Downstream interface(s)
information

display pim rp-info

Use display pim rp-info to display RP information in the PIM-SM domain.
Syntax
display pim [ vpn-instance vpn-instance-name ] rp-info [ group-address ]
Views
Any view
Predefine
d user roles
network-admin
network-operator
Description
Flag of the (S, G) entry or (*, G) entry:
ACT—The entry has been used for routing data.
DEL—The entry will be removed.
EXPRUNE—Some outgoing interfaces are pruned by other multicast
routing protocols.
EXT—The entry contains outgoing interfaces provided by other
multicast routing protocols.
LOC—The entry is on a router directly connected to the same subnet
with the multicast source.
NIIF—The entry contains unknown incoming interfaces.
NONBR—The entry has a PIM neighbor lookup failure.
RPT—The entry is on an RPT branch where (S, G) prunes have been
sent to the RP.
SPT—The entry is on the SPT.
SWT—The entry is in the process of RP
WC—The entry contains a wildcard.
Length of time since the (S, G) entry or (*, G) entry was installed.
Upstream (incoming) interface of the (S, G) entry or (*, G) entry.
Upstream neighbor of the (S, G) entry or (*, G) entry.
RP neighbor of the (S, G) or (*, G) entry:
F
For a (*, G) entry, if the RPF neighbor is the RP, the field displays NULL.
For an (S, G) entry, if the RPF neighbor is a router t
to the multicast source, this field displays NULL.
Information about the downstream interfaces
Total number of downstream interfaces
Names of the downstream interfaces.
Protocol type on the downstream interf
Uptime of the downstream interfaces.
Expiration time of the downstream interfaces.
132
T-to-SPT switchover.
hat directly connects
:
.
aces.

Advertisement

Table of Contents
loading

This manual is also suitable for:

5920 series

Table of Contents