Creating, Editing And Saving Data Records - Siemens simatic hmi op27 Equipment Manual

Recipes
8.1.1

Creating, Editing and Saving Data Records

In this section
The data structure is defined with the recipe during configuration. Initially,
there are no data records. They are created, edited and stored on data media
directly on the OP using the Data Record Processing standard screen.
How to operate the standard screen Data Record Processing is the subject of
this section.
Formatting data
Before a data record can be stored, the data medium must be formatted. To do
media
this, use the formatting function in the input field beneath the data medium
selection.
8-8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Note
Any data records on the data medium are deleted by the formatting operation.
Formatting of a data medium cannot be undone.
Step
1 Position the cursor in the Data Record Processing stan-
dard screen on the symbolic input field Format:
2 Open the selection window with:
3 Select the formatting function from the selection window
with:
4 Confirn the selection with:
5 Confirm the confirmation request in the following two system message
with "Yes" by entering 0
or cancel the action with:
Action
ENTER
ENTER
ESC
OP27, OP37 Equipment Manual
Release 05/99