System configuration for Ethernet communication (FR-F800-E)
2.9
System configuration for Ethernet communication
(FR-F800-E)
2.9.1
Ethernet communication overview
The FR-F800-E inverter is equipped with an Ethernet board. Communication with network devices
can be made via Ethernet by connecting an Ethernet cable to the Ethernet connector on the Ethernet
board.
Fig. 2-59:
● Precautions for Ethernet communication
– In order to protect the inverter and the system against unauthorized access by external
systems via network, take security measures including firewall settings.
– Depending on the network environment, the inverter may not operate as intended due to
delays or disconnection in communication. Carefully consider the conditions and safety for
the inverter on site.
2 - 82
Personal computer
Programmable controller
(FR Configurator2)
Ethernet communication system configuration
Installation and wiring
Hub
GOT
Inverter
Inverter
I003104E