Mitsubishi Electric FR-F820-00077 Instruction Manual page 468

(T) Multi-Function Input Terminal Parameters
NOTES The STP (STOP) signal is assigned to the STP (STOP) terminal by the initial setting. Set "25" in any of
Pr. 178 to Pr. 189 to assign the STP (STOP) signal to another terminal.
When the JOG operation is enabled by turning ON the JOG signal, STP (STOP) signal will be disa-
bled.
Even when the output is stopped by turning ON the MRS signal, self-holding function is not can-
celled.
Start signal selection
STF
OFF
OFF
ON
ON
Tab. 5-129: Start signal selection
Parameters referred to
Pr. 4 to Pr. 6
Pr. 178 to Pr. 189
5 - 296
STR
0 to 100 s, 9999
OFF
ON Reverse rotation
OFF Forward rotation
ON
(multi-speed setting)
(input terminal function selection)
Pr. 250 setting and inverter condition
Stop
Stop
Parameters
1000 s to 1100 s, 8888
Stop
Forward rotation
Reverse rotation
=> page 5-60
=> page 5-285