Mitsubishi Electric FR-F820-00077 Instruction Manual page 693

Fr-f800 series
Hide thumbs Also See for FR-F820-00077:
Table of Contents

Advertisement

Parameters
Standard Object Types Supported:
An object type is supported if it may be present in the device. For each standard Object Type sup-
ported provide the following data:
1) Whether objects of this type are dynamically creatable using the CreateObject service
2) Whether objects of this type are dynamically deletable using the DeleteObject service
3) List of the optional properties supported
4) List of all properties that are writable where not otherwise required by this standard
5) List of all properties that are conditionally writable where not otherwise required by this standard
6) List of proprietary properties and for each its property identifier, datatype, and meaning
7) List of any property range restrictions
Dynamic object creation and deletion is not supported.
For the object types supported by the FR-F800 series, refer to page 5-511.
Data Link Layer Options:
BACnet IP, (Annex J)
BACnet IP, (Annex J), Foreign Device
ISO 8802-3, Ethernet (Clause 7)
ANSI/ATA 878.1, 2.5 Mb. ARCNET (Clause 8)
ANSI/ATA 878.1, RS-485 ARCNET (Clause 8), baud rate(s)
✔ MS/TP master (Clause 9), baud rate(s): 9600, 19200, 38400, 76800
MS/TP slave (Clause 9), baud rate(s):
Point-To-Point, EIA 232 (Clause 10), baud rate(s):
Point-To-Point, modem, (Clause 10), baud rate(s):
LonTalk, (Clause 11), medium:
Other:
Device Address Binding:
Is static device binding supported? (This is currently necessary for two-way communication with MS/
TP slaves and certain other devices.)
Networking Options:
Router, Clause 6 - List all routing configurations, e.g., ARCNET-Ethernet, Ethernet-MS/TP, etc.
Annex H, BACnet Tunneling Router over IP
BACnet/IP Broadcast Management Device (BBMD)
Does the BBMD support registrations by Foreign Devices?
Character Sets Supported:
Indicating support for multiple character sets does not imply that they can all be supported simulta-
neously.
✔ ANSI X3.4
ISO 10646 (UCS-2)
If this product is a communication gateway, describe the types of non-BACnet equipment/net-
works that the gateway supports:
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
FR-F800
(N) Operation via communication and its settings
✔ No
Yes
Yes
TM
TM
IBM
/Microsoft
DBCS
ISO 10646 (UCS-4)
No
ISO 8859-1
JIS C 6226
5 - 521

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents