Advanced Commissioning; Overview Of The Inverter Functions - Siemens SINAMICS G120 Operating Instructions Manual

Advanced commissioning

6.1

Overview of the inverter functions

Figure 6-1 Overview of inverter functions
Drive control
The inverter receives its commands from the higher-level control via the terminal strip or the
fieldbus interface of the Control Unit. The drive control defines how the inverter responds to
the commands.
The inverter can switch between different settings of the drive control.
The inverter provides a motor holding brake control. The motor holding brake holds the motor
in position when it is switched off.
Converter with the CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2017, FW V4.7 SP6, A5E34259001B AD
Sequence control when switching the motor on and off (Page 176)
Adapt the default setting of the terminal strip (Page 178)
Controlling clockwise and counter-clockwise rotation via digital inputs (Page 190)
Drive control via PROFIBUS or PROFINET (Page 196)
Drive control via Modbus RTU (Page 212)
Drive control via USS (Page 215)
Drive control via Ethernet/IP (Page 218)
Jogging (Page 219)
Switching over the drive control (command data set) (Page 220)
6
173