Siemens SINAMICS G120 Operating Instructions Manual page 19

Danger to life when safety functions are inactive
Safety functions that are inactive or that have not been adjusted accordingly can cause
operational faults on machines that could lead to serious injury or death.
● Observe the information in the appropriate product documentation before commissioning.
● Carry out a safety inspection for functions relevant to safety on the entire system, including
● Ensure that the safety functions used in your drives and automation tasks are adjusted
● Perform a function test.
● Only put your plant into live operation once you have guaranteed that the functions relevant
Note
Important safety notices for Safety Integrated functions
If you want to use Safety Integrated functions, you must observe the safety notices in the Safety
Integrated manuals.
Danger to life or malfunctions of the machine as a result of incorrect or changed
parameterization
As a result of incorrect or changed parameterization, machines can malfunction, which in turn
can lead to injuries or death.
● Protect the parameterization (parameter assignments) against unauthorized access.
● Respond to possible malfunctions by applying suitable measures (e.g. EMERGENCY
Converter with the CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2017, FW V4.7 SP6, A5E34259001B AD
WARNING
all safety-related components.
and activated through appropriate parameterizing.
to safety are running correctly.
WARNING
STOP or EMERGENCY OFF).
Fundamental safety instructions
1.1 General safety instructions
19