Quick Commissioning With A Pc; Creating A Project - Siemens SINAMICS G120 Operating Instructions Manual

Low voltage converters chassis devices with cu240b-2 and cu240e-2

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Quick commissioning with a PC

The screen forms that are shown in this manual show generally valid examples. The number

of setting options available in screen forms depends on the particular inverter type.

Creating a new project

To create a new project, proceed as follows:

1. Start the commissioning software STARTER or Startdrive.

2. In the menu, select "Project" → "New...".

3. Specify a name of your choice for the project.

You have created a new project.

Converter with the CU240B-2 and CU240E-2 Control Units

Operating Instructions, 01/2017, FW V4.7 SP6, A5E34259001B AD

Commissioning

5.5 Quick commissioning with a PC