Safely Remove The Memory Card - Siemens SINAMICS G120 Operating Instructions Manual
Low voltage converters
chassis devices with cu240b-2 and cu240e-2
Hide thumbs
Also See for SINAMICS G120:
- List manual (1256 pages) ,
- Manual (732 pages) ,
- Operating instructions manual (550 pages)
Table of Contents
Advertisement
7.1.4
Safely remove the memory card
NOTICE
Data loss from improper handling of the memory card
If you remove the memory card when the converter is switched on without implementing the
"safe removal" function you may destroy the file system on the memory card. The data on
the memory card are lost. The memory card will only function again after formatting.
● Only remove the memory card using the "safe removal" function.
Procedure with STARTER
To safely remove the memory card, proceed as follows:
1. Go online.
2. In the Drive Navigatorselect the following screen form:
3. Click on the button to safely remove the memory card.
STARTER will tell you whether you can remove the memory card from the inverter.
You have now safely removed the memory card from the inverter.
Converter with the CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2017, FW V4.7 SP6, A5E34259001B AD
Saving the settings and series commissioning
7.1 Backing up and transferring settings using a memory card
355
Advertisement
Table of Contents
