Siemens SINAMICS G120 Operating Instructions Manual page 157

Application class
Torque control
Commissioning
● Contrary to "Dynamic Drive Control" a speed
controller does not have to be set
● In comparison to the "EXPERT" setting:
–
–
● Standard Drive Control is preset for Power
Modules, frame size A ... frame size C
Converter with the CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2017, FW V4.7 SP6, A5E34259001B AD
Standard Drive Control
Without torque control
Simplified commissioning using
preassigned motor data
Reduced number of parameters
5.5 Quick commissioning with a PC
Dynamic Drive Control
Speed control with lower-level torque control
● Reduced parameter quantity when compared to
the "EXPERT" setting:
● Dynamic Drive Control is preset for Power
Modules, frame size D ... frame size F
Commissioning
157